| Part Number : 210121X1 | Manufacturer : Dana Corp | ||
| NSN : 3130-00-872-1540 (3130008721540) | |||
| Item Name : Bearing Unit Plain | CAGE Code : 95019 | ||
| NIIN : 00-872-1540 (008721540) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30557 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 210121X1, that of which is listed with the description Bearing Unit Plain; Manufactured by Dana Corp and listed alongside the NSN 3130008721540, part number 210121X1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 210121X1 | Manufacturer : Dana Corp | ||
| NSN Number : 3130-00-872-1540 (3130008721540) | |||
| Item Name : Bearing Unit Plain | CAGE Code : 95019 | ||
| NIIN : 008721540 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 210121X1, that of which is listed with the description Bearing Unit Plain; Manufactured by Dana Corp and listed alongside the NSN 3130008721540, part number 210121X1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-872-1540 Item Description: BEARING UNIT,PLAIN | 3130 | 008721540 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 210121X1 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AFWC | Housing Height | 6.5620 INCHES NOMINAL |
| CWJW | Mounting Hole Type | ROUND, UNTHREADED |
| ACYB | Base Thickness | 0.6560 INCHES NOMINAL |
| AGKL | Lubrication Fitting Type | CUP |
| SR-5 | Design Control Reference Or Manufacturers Code | 23862 |
| MATT | Material | RUBBER SYNTHETIC HOUSING |
| MATT | Material | STEEL AND |
| ADFX | Center To Center Distance Between Mounting Holes Along Width | 7.6250 INCHES NOMINAL |
| MATT | Material | STEEL BEARING |
| ABXV | Bore Diameter | 2.0000 INCHES NOMINAL |
| ANJS | Shaft End Type | OPEN |
| ANKK | Load Capability Type | RADIAL |
| ANKP | Height From Bottom Of Base To Bore Centerline | 2.8120 INCHES NOMINAL |
| SR-5 | Design Control Reference Or Manufacturers Code | 2406989 |
| AFWD | Housing Length | 2.5620 INCHES NOMINAL |
| AFWE | Housing Width | 9.1250 INCHES NOMINAL |
| SR-5 | Design Control Reference Or Manufacturers Code | |
| AGZA | Alignment Type | RIGID |
| MATT | Material | RUBBER SYNTHETIC SEAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CWGR | Lubrication Fitting Angle From Horizontal Centerline | 45.0 DEGREES NOMINAL |
| AGNF | Base Length | 2.2500 INCHES NOMINAL |
| FEAT | Special Features | FURNISHED WITH 2 ALIGNING RINGS |
| LBMA | Lubrication Material | GREASE |
| ABTB | Mounting Hole Diameter | 0.6250 INCHES NOMINAL |
| STYL | Style Designator | PILLOW BLOCK, SEPARABLE WITH INNERLINER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
