| Part Number : S42512A112112-02000 | Manufacturer : Dana Corp | ||
| NSN : 4720-00-595-1983 (4720005951983) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 79470 | ||
| NIIN : 00-595-1983 (005951983) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: S42512A11211202000 | |||
Thank you for taking an interest in part number S42512A112112-02000, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Dana Corp and listed alongside the NSN 4720005951983, part number S42512A112112-02000 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
360 tents l l c
CAGE Code: 4CT45 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
5605 n illinois inc
CAGE Code: 089F4 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
3m quante ag telekommunikation
CAGE Code: D2771 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
1 source electronics inc
CAGE Code: 551K1 |
3d
CAGE Code: 0WY47 |
|
12 volt shop
CAGE Code: Z0JM2 |
1spatial ltd
CAGE Code: U3518 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
4dsp llc
CAGE Code: 31UJ9 |
|
5dt inc
CAGE Code: 3BPF1 |
3m belgium nv
CAGE Code: B2281 |
|
3gen corporation
CAGE Code: 3SPS3 |
| Part Number : S42512A112112-02000 | Manufacturer : Dana Corp | ||
| NSN Number : 4720-00-595-1983 (4720005951983) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 79470 | ||
| NIIN : 005951983 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number S42512A112112-02000, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Dana Corp and listed alongside the NSN 4720005951983, part number S42512A112112-02000 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-595-1983 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 005951983 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 02512E112112-02000 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.250 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPTF 1ST END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
