| Part Number : T36048 | Manufacturer : Deere And Company | ||
| NSN : 5340-01-240-0878 (5340012400878) | |||
| Item Name : Bracket Angle | CAGE Code : 75160 | ||
| NIIN : 01-240-0878 (012400878) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number T36048, that of which is listed with the description Bracket Angle; Manufactured by Deere And Company and listed alongside the NSN 5340012400878, part number T36048 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : T36048 | Manufacturer : Deere And Company | ||
| NSN Number : 5340-01-240-0878 (5340012400878) | |||
| Item Name : Bracket Angle | CAGE Code : 75160 | ||
| NIIN : 012400878 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number T36048, that of which is listed with the description Bracket Angle; Manufactured by Deere And Company and listed alongside the NSN 5340012400878, part number T36048 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-240-0878 Item PartTypeName: BRACKET,ANGLE | 5340 | 012400878 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T36048 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.850 INCHES MINIMUM AND 0.970 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.340 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| AHLH | SECOND LEG END WIDTH | 0.870 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.344 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.460 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| AHQQ | FIRST LEG END WIDTH | 0.880 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.680 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | A4-2,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
