| Part Number : 1128CSM46503-13 | Manufacturer : Delpo Precision Tool And Instrument Co | ||
| NSN : 5305-01-350-4548 (5305013504548) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 65759 | ||
| NIIN : 01-350-4548 (013504548) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1128CSM4650313 | |||
Thank you for taking an interest in part number 1128CSM46503-13, that of which is listed with the description Screw Close Tolerance; Manufactured by Delpo Precision Tool And Instrument Co and listed alongside the NSN 5305013504548, part number 1128CSM46503-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1128CSM46503-13 | Manufacturer : Delpo Precision Tool And Instrument Co | ||
| NSN Number : 5305-01-350-4548 (5305013504548) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 65759 | ||
| NIIN : 013504548 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 1128CSM46503-13, that of which is listed with the description Screw Close Tolerance; Manufactured by Delpo Precision Tool And Instrument Co and listed alongside the NSN 5305013504548, part number 1128CSM46503-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-350-4548 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013504548 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1128CSM46503-13 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASA | THREAD LENGTH | 0.819 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8740 OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.194 INCHES MINIMUM AND 1.225 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.075 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 0.375 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 165000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 37.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.124 INCHES MINIMUM FIRST HOLE AND 1.155 INCHES MAXIMUM FIRST HOLE |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
