| Part Number : 33-072 | Manufacturer : Delta Intl Machinery Corp | ||
| NSN : 3220-01-390-6991 (3220013906991) | |||
| Item Name : Saw Radial Overarm Woodworking | CAGE Code : 83738 | ||
| NIIN : 01-390-6991 (013906991) | |||
| FSC Code : 3220 Woodworking Machines | |||
| FSG Code : 32 Woodworking Machinery and Equipment | |||
| INC Code : 07446 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 33072 | |||
Thank you for taking an interest in part number 33-072, that of which is listed with the description Saw Radial Overarm Woodworking; Manufactured by Delta Intl Machinery Corp and listed alongside the NSN 3220013906991, part number 33-072 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 33-072 | Manufacturer : Delta Intl Machinery Corp | ||
| NSN Number : 3220-01-390-6991 (3220013906991) | |||
| Item Name : Saw Radial Overarm Woodworking | CAGE Code : 83738 | ||
| NIIN : 013906991 | |||
| FSC CODE : 3220 Woodworking Machines | |||
Thank you for taking an interest in part number 33-072, that of which is listed with the description Saw Radial Overarm Woodworking; Manufactured by Delta Intl Machinery Corp and listed alongside the NSN 3220013906991, part number 33-072 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3220-01-390-6991 Item PartTypeName: SAW,RADIAL OVERARM,WOODWORKING | 3220 | 013906991 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3456 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| BZZJ | MAXIMUM RIPPING CAPACITY | 41.000 INCHES |
| CBBB | POWER RIP FEED | NOT INCLUDED |
| CBBC | POWER CROSSFEED | NOT INCLUDED |
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| AMSE | VOLTAGE RATING | 230.0 VOLTS NOMINAL OR 460.0 VOLTS NOMINAL |
| BYPG | YOKE TYPE | NONSWIVEL |
| FEAT | SPECIAL FEATURES | SPEED 3450 RPM; O, 30, 45, 60, AND 90 DEGREE DEVEL STOPS; 45 AND 90 DEGREE, RIGHT AND LEFT MITER STOPS; 44 IN. LONG BY 36 1/2 IN. WIDE TABLE; HEIGHT 32 IN.; HEIGHT WITH LEGS 76 IN.; WEIGHT 745 POUNDS |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | AUTOMATIC ELECTRONIC BRAKE, 1; CUTTINGHEAD CLAMP KNOB, 1; ADJUSTABLE CROSSCUT STOP, 1; STEEL LEGS, 4 |
| AMQY | INSTALLATION DESIGN | PORTABLE |
| ANCY | HORSEPOWER RATING | 5.000 |
| FAAZ | PHASE | THREE |
| ANJN | MOTOR TYPE | NONTILTING |
| BPTM | BLADE MAXIMUM DIAMETER ACCOMMODATED | 16.000 INCHES |
| ACDC | CURRENT TYPE | AC |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| BZZH | CUTOFF CAPACITY | 1 IN. DEEP AND 29 IN. WIDE CROSS CUT; 1 IN. DEEP AND 22 IN. WIDE MITER AT 45 DEGREES RIGHT AND LEFT |
| BZZZ | BLADE ARBOR DIAMETER ACCOMMODATED | 1.000 INCHES NOMINAL |
| CBBD | SAW BLADE MOTOR ELECTRIC BRAKE FEATURE | INCLUDED |
| CBBF | ARM ROTATION IN DEG | 90.0 |
| CBBJ | CUTTING TOOL TAPPED ARBOR FEATURE | INCLUDED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
