| Part Number : B25-36 | Manufacturer : Designatronics Incorporated | ||
| NSN : 3020-01-115-1044 (3020011151044) | |||
| Item Name : Gearspur | CAGE Code : 00328 | ||
| NIIN : 01-115-1044 (011151044) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: B2536 | |||
Thank you for taking an interest in part number B25-36, that of which is listed with the description Gearspur; Manufactured by Designatronics Incorporated and listed alongside the NSN 3020011151044, part number B25-36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
12 volt shop
CAGE Code: Z0JM2 |
3m norge a s
CAGE Code: N0447 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
3m health care service center
CAGE Code: 0UTW7 |
3 ring inc
CAGE Code: 68310 |
|
3h products co
CAGE Code: 0CJ60 |
3d robotics llc
CAGE Code: 64TY6 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
24 hour distributors
CAGE Code: 12136,3WKM0 |
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
5 11 inc
CAGE Code: 3YEL6 |
|
3m purification pty limited
CAGE Code: Z5295 |
14 dock drive inc
CAGE Code: 14677 |
|
4dsp llc
CAGE Code: 31UJ9 |
| Part Number : B25-36 | Manufacturer : Designatronics Incorporated | ||
| NSN Number : 3020-01-115-1044 (3020011151044) | |||
| Item Name : Gearspur | CAGE Code : 00328 | ||
| NIIN : 011151044 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number B25-36, that of which is listed with the description Gearspur; Manufactured by Designatronics Incorporated and listed alongside the NSN 3020011151044, part number B25-36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-115-1044 Item PartTypeName: GEAR,SPUR | 3020 | 011151044 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 37011021-036 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.395 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote