| Part Number : C509 | Manufacturer : Detroit Diamond Drilling Inc | ||
| NSN : 5315-00-090-5370 (5315000905370) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 91796 | ||
| NIIN : 00-090-5370 (000905370) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number C509, that of which is listed with the description Pin Grooved Headless; Manufactured by Detroit Diamond Drilling Inc and listed alongside the NSN 5315000905370, part number C509 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : C509 | Manufacturer : Detroit Diamond Drilling Inc | ||
| NSN Number : 5315-00-090-5370 (5315000905370) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 91796 | ||
| NIIN : 000905370 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number C509, that of which is listed with the description Pin Grooved Headless; Manufactured by Detroit Diamond Drilling Inc and listed alongside the NSN 5315000905370, part number C509 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-090-5370 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 000905370 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 25A0538 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | RADIUS |
| ABHP | OVERALL LENGTH | 3.312 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.7480 INCHES MINIMUM AND 0.7495 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 3.062 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.560 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
| ABPE | UNDERCUT RADIUS | 0.031 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.500 INCHES NOMINAL |
| ALWS | SECOND END CORNER RADIUS | 0.010 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | SHANK END |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DRILLED AND TAPPED HOLE FROM GROOVED END 1/8 IN. STD PIPE THD 1.938 IN. DEEP |
| MATT | MATERIAL | STEEL COMP 1020 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
