| Part Number : DMS 84013B | Manufacturer : Dla Land And Maritime | ||
| NSN : 5905-00-133-3056 (5905001333056) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 16236 | ||
| NIIN : 00-133-3056 (001333056) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number DMS 84013B, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Dla Land And Maritime and listed alongside the NSN 5905001333056, part number DMS 84013B is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : DMS 84013B | Manufacturer : Dla Land And Maritime | ||
| NSN Number : 5905-00-133-3056 (5905001333056) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 16236 | ||
| NIIN : 001333056 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number DMS 84013B, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Dla Land And Maritime and listed alongside the NSN 5905001333056, part number DMS 84013B is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-133-3056 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 001333056 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3282P1-502 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 100.0 SINGLE SECTION |
| AFJN | III FRAGILITY FACTOR | MODERATELY DELICATE |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| ABTD | MOUNTING SLOT WIDTH | 0.074 INCHES MINIMUM |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.120 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | TERMINAL AND SLOT |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLE/SLOT |
| ABJT | TERMINAL LENGTH | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
