| Part Number : L04034 | Manufacturer : Dla Land And Maritime | ||
| NSN : 5905-01-287-6600 (5905012876600) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 16236 | ||
| NIIN : 01-287-6600 (012876600) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number L04034, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Dla Land And Maritime and listed alongside the NSN 5905012876600, part number L04034 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : L04034 | Manufacturer : Dla Land And Maritime | ||
| NSN Number : 5905-01-287-6600 (5905012876600) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 16236 | ||
| NIIN : 012876600 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number L04034, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Dla Land And Maritime and listed alongside the NSN 5905012876600, part number L04034 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-287-6600 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 012876600 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18-128-270 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -260.0 TO 260.0 |
| AAPP | ELECTRICAL RESISTANCE | 270.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.562 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.125 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 8.000 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 9.500 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 160.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | POWER SUPPLY |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| BYML | MOUNTING HOLE SIZE | 0.250 INCHES NOMINAL |
| CBME | CUBIC MEASURE | 9.817 CUBIC INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSCF | TERMINAL TYPE | TAB W/SCREW |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04034; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
| STYL | STYLE DESIGNATOR | RADIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 14933-L04034 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
