| Part Number : L04055 | Manufacturer : Dla Land And Maritime | ||
| NSN : 5905-01-295-2194 (5905012952194) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 16236 | ||
| NIIN : 01-295-2194 (012952194) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number L04055, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Dla Land And Maritime and listed alongside the NSN 5905012952194, part number L04055 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : L04055 | Manufacturer : Dla Land And Maritime | ||
| NSN Number : 5905-01-295-2194 (5905012952194) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 16236 | ||
| NIIN : 012952194 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number L04055, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Dla Land And Maritime and listed alongside the NSN 5905012952194, part number L04055 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-295-2194 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 012952194 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 913342-45 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 32.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 415.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 8.495 INCHES MINIMUM AND 8.505 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 400.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 40.0 DEG CELSIUS |
| AFWW | TERMINAL WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | UNIT TEST DEV |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | 17.629 CUBIC INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04055; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
| PKWT | UNPACKAGED UNIT WEIGHT | 200.0 GRAMS |
| STYL | STYLE DESIGNATOR | RADIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 14933-L04055 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
