| Part Number : 18-3137 | Manufacturer : Drs Power And Control Technologies | ||
| NSN : 5340-01-448-3222 (5340014483222) | |||
| Item Name : Standoff Threaded Snap In | CAGE Code : 27192 | ||
| NIIN : 01-448-3222 (014483222) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 40279 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 183137 | |||
Thank you for taking an interest in part number 18-3137, that of which is listed with the description Standoff Threaded Snap In; Manufactured by Drs Power And Control Technologies and listed alongside the NSN 5340014483222, part number 18-3137 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 18-3137 | Manufacturer : Drs Power And Control Technologies | ||
| NSN Number : 5340-01-448-3222 (5340014483222) | |||
| Item Name : Standoff Threaded Snap In | CAGE Code : 27192 | ||
| NIIN : 014483222 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 18-3137, that of which is listed with the description Standoff Threaded Snap In; Manufactured by Drs Power And Control Technologies and listed alongside the NSN 5340014483222, part number 18-3137 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-448-3222 Item PartTypeName: STANDOFF,THREADED,SNAP-IN | 5340 | 014483222 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18-3137 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 2B RIGHT INTERNAL |
| AAJF | Thread Direction | RIGHT-HAND RIGHT INTERNAL |
| AAJF | Thread Direction | LEFT-HAND LEFT EXTERNAL |
| CXYF | Left Projection Chamfer Angle | 45.0 DEGREES NOMINAL |
| CQJX | Nominal Thread Size | 0.190 INCHES LEFT EXTERNAL |
| AATB | Width Between Flats | 0.375 INCHES NOMINAL |
| CRTL | Criticality Code Justification | ZZZY |
| ABRY | Length | 4.000 INCHES NOMINAL |
| CXXX | Right Projection Length | 0.374 INCHES NOMINAL |
| SFTT | Surface Treatment | PASSIVATE STANDOFF |
| TEST | Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | Thread Series Designator | UNC RIGHT INTERNAL |
| AAJD | Thread Class | 2A LEFT EXTERNAL |
| THSD | Thread Series Designator | UNF LEFT EXTERNAL |
| CQJX | Nominal Thread Size | 0.138 INCHES RIGHT INTERNAL |
| SPCL | Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| CMLP | Thread Quantity Per Inch | 32 RIGHT INTERNAL |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| CMLP | Thread Quantity Per Inch | 32 LEFT EXTERNAL |
| STDC | Surface Treatment Document And Classification | QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE STANDOFF |
| AASA | Thread Length | 0.265 INCHES NOMINAL LEFT EXTERNAL |
| CXYD | Right End Chamfer Angle | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| MATT | Material | STEEL COMP 303 STANDOFF |
| MDCL | Material Document And Classification | STM A581 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF |
| CXXW | Right Projection Diameter | 0.190 INCHES NOMINAL |
| STYL | Style Designator | LEFT INTERNAL AND RIGHT EXTERNAL THREAD |
| ZZZW | Departure From Cited Document | AS MODIFIED BY MATERIAL AND LOCKING FEATURE( AS APPLICABLE ) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
