| Part Number : 69-1099 | Manufacturer : Drs Power And Control Technologies | ||
| NSN : 5905-00-539-2346 (5905005392346) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 27192 | ||
| NIIN : 00-539-2346 (005392346) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 691099 | |||
Thank you for taking an interest in part number 69-1099, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Drs Power And Control Technologies and listed alongside the NSN 5905005392346, part number 69-1099 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
320 matlogpel breda centrale
CAGE Code: H2851 |
3m belgium nv
CAGE Code: B2281 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
1343080 alberta ltd
CAGE Code: L0796 |
|
3 l filters ltd
CAGE Code: 37941 |
4 star hose and supply inc
CAGE Code: 079J5 |
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
3m aerospace
CAGE Code: R0844 |
|
3m health care ltd
CAGE Code: U5989 |
2m machining and manufacturing
CAGE Code: 6Y604 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
3m co admininistrative electronic
CAGE Code: 20999 |
|
14 dock drive inc
CAGE Code: 14677 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
2mb international
CAGE Code: FA7N3 |
| Part Number : 69-1099 | Manufacturer : Drs Power And Control Technologies | ||
| NSN Number : 5905-00-539-2346 (5905005392346) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 27192 | ||
| NIIN : 005392346 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 69-1099, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Drs Power And Control Technologies and listed alongside the NSN 5905005392346, part number 69-1099 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-539-2346 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 005392346 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 917J713PCH42 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 200.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 |
| AAQZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AARB | UNABLE TO DECODE | UNABLE TO DECODE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.562 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.625 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.968 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 25.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 50.0 DEG CELSIUS |
| AFWW | TERMINAL WIDTH | 0.250 INCHES NOMINAL |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | 0.623 CUBIC INCHES |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| STYL | STYLE DESIGNATOR | RADIAL TERMINAL EACH END |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | IW FORM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote