| Part Number : SW24770 | Manufacturer : Drs Sustainment Systems Inc | ||
| NSN : 4320-01-366-9438 (4320013669438) | |||
| Item Name : Motor Hydraulic | CAGE Code : 98255 | ||
| NIIN : 01-366-9438 (013669438) | |||
| FSC Code : 4320 Power And Hand Pumps | |||
| FSG Code : 43 Pumps And Compressors | |||
| INC Code : 06128 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number SW24770, that of which is listed with the description Motor Hydraulic; Manufactured by Drs Sustainment Systems Inc and listed alongside the NSN 4320013669438, part number SW24770 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SW24770 | Manufacturer : Drs Sustainment Systems Inc | ||
| NSN Number : 4320-01-366-9438 (4320013669438) | |||
| Item Name : Motor Hydraulic | CAGE Code : 98255 | ||
| NIIN : 013669438 | |||
| FSC CODE : 4320 Power And Hand Pumps | |||
Thank you for taking an interest in part number SW24770, that of which is listed with the description Motor Hydraulic; Manufactured by Drs Sustainment Systems Inc and listed alongside the NSN 4320013669438, part number SW24770 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| SUPP | Supplementary Features | 18.4LBS; HYDRAULIC FLUID; OPERATING TEMPERATURE -40.0DEG F TO 125.0DEG F |
| ASMM | Connection Quantity | 1 |
| AFFL | Mounting Bolt Circle Diameter | 4.180 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| ANNL | Square End Length | 0.900 INCHES NOMINAL AND 0.820 INCHES NOMINAL |
| AXFQ | Constant Displacement Per Revolution | 10.600 CUBIC INCHES |
| ABTJ | Mounting Hole Quantity | 2 |
| ABUJ | Thread Size | 0.875-14 AND 0.438-20 |
| AWLS | Connection Type | INLET AND OUTLET AND DRAIN |
| AEQC | Operating Speed At Rated Capacity In Rpm | 328 |
| AAJF | Thread Direction | RIGHT-HAND |
| AJYP | Screw Thread Series Designator | UNF |
| AKCT | Shaft Rotation Direction | CLOCKWISE |
| FEAT | Special Features | HEX SHAFT BOTH ENDS; MOTOR 4.82IN.L,4.56IN.H,4.500IN.W; MTG FLANGE SAE A-2 BOLT,5.12IN.W; OTHER END EARS 2 PLACES 180.0DEG APART,WITH 0.500-13UNC-28THD HOLES; PORTS SAE 8 O-RING LOCATED ON TOP; 7/16-20UNF O-RING PLUG; |
| AAXX | Mounting Type | FLANGE |
| APJC | Thread Location | INTERNAL |
| AAZK | Width Across Flats | 0.750 INCHES NOMINAL |
| AXFB | Maximum Working Pressure Rating At Specified Temp Range | 2750.0PSI CONTINUOUS AND 3250.OPSI INTERMITTENT AT A KNOWN TEMPERATURE |
| AXFC | Connection Design | THREADED |
| AXFP | Displacement Type | CONSTANT |
| ABTB | Mounting Hole Diameter | 0.540 INCHES NOMINAL |
| AAPL | Torque Load Rating | 4081.0 INCH-POUNDS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
