| Part Number : NAS1169-8 | Manufacturer : Duplicate Parts Co | ||
| NSN : 5310-00-797-4991 (5310007974991) | |||
| Item Name : Washer Finishing | CAGE Code : 25150 | ||
| NIIN : 00-797-4991 (007974991) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15932 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: NAS11698 | |||
Thank you for taking an interest in part number NAS1169-8, that of which is listed with the description Washer Finishing; Manufactured by Duplicate Parts Co and listed alongside the NSN 5310007974991, part number NAS1169-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1169-8 | Manufacturer : Duplicate Parts Co | ||
| NSN Number : 5310-00-797-4991 (5310007974991) | |||
| Item Name : Washer Finishing | CAGE Code : 25150 | ||
| NIIN : 007974991 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number NAS1169-8, that of which is listed with the description Washer Finishing; Manufactured by Duplicate Parts Co and listed alongside the NSN 5310007974991, part number NAS1169-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-797-4991 Item PartTypeName: WASHER,FINISHING | 5310 | 007974991 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1169-8 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| STYL | STYLE DESIGNATOR | FINISHING |
| AAUB | HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.094 INCHES NOMINAL |
| ABMD | RECESS DIAMETER | 0.332 INCHES MINIMUM AND 0.342 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.025 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 42.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM |
| CSTM | RECESS ANGLE | 99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7947,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
