Part Number : IP7013 | Manufacturer : Durable Corporation | ||
NSN : 5310-00-197-7013 (5310001977013) | |||
Item Name : Nut Plain Cap | CAGE Code : 82579 | ||
NIIN : 00-197-7013 (001977013) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 01855 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number IP7013, that of which is listed with the description Nut Plain Cap; Manufactured by Durable Corporation and listed alongside the NSN 5310001977013, part number IP7013 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : IP7013 | Manufacturer : Durable Corporation | ||
NSN Number : 5310-00-197-7013 (5310001977013) | |||
Item Name : Nut Plain Cap | CAGE Code : 82579 | ||
NIIN : 001977013 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number IP7013, that of which is listed with the description Nut Plain Cap; Manufactured by Durable Corporation and listed alongside the NSN 5310001977013, part number IP7013 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-197-7013 Item PartTypeName: NUT,PLAIN,CAP | 5310 | 001977013 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
IP7013 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
ACTA | NUT STYLE | CAP |
ADEA | NUT HEIGHT | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
AGGP | DRILLED HOLE DIAMETER | 0.0625 INCHES NOMINAL |
ALET | HOLE TYPE AND QUANTITY | 1 DRILLED |
ASDB | WIDTH ACROSS FLATS | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
BZRR | THREAD SERIES | UNEF |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQJX | NOMINAL THREAD SIZE | 0.688 INCHES |
CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
CRSQ | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM NUT AND 90.5 DEGREES MAXIMUM NUT |
CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-354 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote