Part Number : 31799 | Manufacturer : E-Systems Inc | ||
NSN : 5310-00-411-9768 (5310004119768) | |||
Item Name : Washer Spring Tension | CAGE Code : 79294 | ||
NIIN : 00-411-9768 (004119768) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15938 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 31799, that of which is listed with the description Washer Spring Tension; Manufactured by E-Systems Inc and listed alongside the NSN 5310004119768, part number 31799 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 31799 | Manufacturer : E-Systems Inc | ||
NSN Number : 5310-00-411-9768 (5310004119768) | |||
Item Name : Washer Spring Tension | CAGE Code : 79294 | ||
NIIN : 004119768 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 31799, that of which is listed with the description Washer Spring Tension; Manufactured by E-Systems Inc and listed alongside the NSN 5310004119768, part number 31799 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-411-9768 Item Description: WASHER,SPRING TENSION | 5310 | 004119768 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
31799 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.400 INCHES NOMINAL |
ABKV | OUTSIDE DIAMETER | 0.470 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
ABKW | OVERALL HEIGHT | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.004 INCHES MINIMUM AND 0.006 INCHES MAXIMUM |
CQBC | MINIMUM TENSILE STRENGTH | 265000 POUNDS PER SQUARE INCH |
MATT | MATERIAL | STEEL COMP C OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote