Part Number : 10188 | Manufacturer : E-Systems Inc | ||
NSN : 5310-00-514-8325 (5310005148325) | |||
Item Name : Washer Spring Tension | CAGE Code : 79294 | ||
NIIN : 00-514-8325 (005148325) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15938 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 10188, that of which is listed with the description Washer Spring Tension; Manufactured by E-Systems Inc and listed alongside the NSN 5310005148325, part number 10188 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 10188 | Manufacturer : E-Systems Inc | ||
NSN Number : 5310-00-514-8325 (5310005148325) | |||
Item Name : Washer Spring Tension | CAGE Code : 79294 | ||
NIIN : 005148325 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 10188, that of which is listed with the description Washer Spring Tension; Manufactured by E-Systems Inc and listed alongside the NSN 5310005148325, part number 10188 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-514-8325 Item PartTypeName: WASHER,SPRING TENSION | 5310 | 005148325 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
10188 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.585 INCHES MINIMUM AND 0.605 INCHES MAXIMUM |
ABKV | OUTSIDE DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
ABKW | OVERALL HEIGHT | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.024 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
CQFM | HARDNESS RATING | 70.0 ROCKWELL A MINIMUM |
CSYM | SURFACE FINISH | 100.0 MICROINCHES ALL SURFACES |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
MATT | MATERIAL | STEEL COMP 302 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote