Part Number : 11367 | Manufacturer : E-Systems Inc | ||
NSN : 5310-00-596-0067 (5310005960067) | |||
Item Name : Washer Spring Tension | CAGE Code : 79294 | ||
NIIN : 00-596-0067 (005960067) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15938 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 11367, that of which is listed with the description Washer Spring Tension; Manufactured by E-Systems Inc and listed alongside the NSN 5310005960067, part number 11367 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 11367 | Manufacturer : E-Systems Inc | ||
NSN Number : 5310-00-596-0067 (5310005960067) | |||
Item Name : Washer Spring Tension | CAGE Code : 79294 | ||
NIIN : 005960067 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 11367, that of which is listed with the description Washer Spring Tension; Manufactured by E-Systems Inc and listed alongside the NSN 5310005960067, part number 11367 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-596-0067 Item PartTypeName: WASHER,SPRING TENSION | 5310 | 005960067 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
11367 | 2 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.690 INCHES NOMINAL |
ABKV | OUTSIDE DIAMETER | 1.188 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 0.125 INCHES NOMINAL |
ABPX | MATERIAL THICKNESS | 0.024 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
CQFM | HARDNESS RATING | 70.0 ROCKWELL A MINIMUM |
MATT | MATERIAL | STEEL COMP 301 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND 3/4 HARD OR COND H FED SPEC ALL MATERIAL RESPONSES OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote