Part Number : 8478 | Manufacturer : E-Systems Inc | ||
NSN : 5945-00-397-5615 (5945003975615) | |||
Item Name : Plunger Solenoid | CAGE Code : 79294 | ||
NIIN : 00-397-5615 (003975615) | |||
FSC Code : 5945 Relays and Solenoids | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 21146 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 8478, that of which is listed with the description Plunger Solenoid; Manufactured by E-Systems Inc and listed alongside the NSN 5945003975615, part number 8478 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 8478 | Manufacturer : E-Systems Inc | ||
NSN Number : 5945-00-397-5615 (5945003975615) | |||
Item Name : Plunger Solenoid | CAGE Code : 79294 | ||
NIIN : 003975615 | |||
FSC CODE : 5945 Relays and Solenoids |
Thank you for taking an interest in part number 8478, that of which is listed with the description Plunger Solenoid; Manufactured by E-Systems Inc and listed alongside the NSN 5945003975615, part number 8478 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5945-00-397-5615 Item PartTypeName: PLUNGER,SOLENOID | 5945 | 003975615 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
8478 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 1.138 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.093 INCHES NOMINAL |
ADAV | OVERALL DIAMETER | 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
APEN | SHAFT TYPE | PLAIN ROUND |
APEQ | FELT WASHER | NOT INCLUDED |
APER | MACHINED UNDERCUT FEATURE | NOT INCLUDED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote