| Part Number : A950004-4S-0170 | Manufacturer : Eaton Aeroquip Inc | ||
| NSN : 4720-01-005-8113 (4720010058113) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 00624 | ||
| NIIN : 01-005-8113 (010058113) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: A9500044S0170 | |||
Thank you for taking an interest in part number A950004-4S-0170, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Eaton Aeroquip Inc and listed alongside the NSN 4720010058113, part number A950004-4S-0170 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
394 test maintenance squadron sac
CAGE Code: 33044 |
2709th af vehicle control group
CAGE Code: 10994 |
|
3m belgium nv
CAGE Code: B2281 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
4 ld inc
CAGE Code: 0ACW5 |
3m health care service center
CAGE Code: 0UTW7 |
|
5 11 tactical inc
CAGE Code: 3P4J9 |
3h industries inc
CAGE Code: 60754 |
|
21st century optics inc
CAGE Code: 0TN38 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
2101 llc
CAGE Code: 1GH76 |
4m sigma corporation
CAGE Code: 0BC31 |
|
12 volt shop
CAGE Code: Z0JM2 |
1st american metals inc
CAGE Code: 0MP49 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
| Part Number : A950004-4S-0170 | Manufacturer : Eaton Aeroquip Inc | ||
| NSN Number : 4720-01-005-8113 (4720010058113) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 00624 | ||
| NIIN : 010058113 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number A950004-4S-0170, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Eaton Aeroquip Inc and listed alongside the NSN 4720010058113, part number A950004-4S-0170 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-005-8113 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 010058113 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A950004-4S-0170 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.516 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND FUEL RESISTANT AND WATER RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
