| Part Number : 1C754GGG0151180 | Manufacturer : Eaton Aeroquip Inc | ||
| NSN : 4720-01-355-7639 (4720013557639) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 00624 | ||
| NIIN : 01-355-7639 (013557639) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 1C754GGG0151180, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Eaton Aeroquip Inc and listed alongside the NSN 4720013557639, part number 1C754GGG0151180 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1C754GGG0151180 | Manufacturer : Eaton Aeroquip Inc | ||
| NSN Number : 4720-01-355-7639 (4720013557639) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 00624 | ||
| NIIN : 013557639 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 1C754GGG0151180, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Eaton Aeroquip Inc and listed alongside the NSN 4720013557639, part number 1C754GGG0151180 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-355-7639 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013557639 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1C754GGG0151180 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 15.120 INCHES NOMINAL WORKING |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.690 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| AGAV | END ITEM IDENTIFICATION | 2350-01-305-0028,HOWITZER,SELF-PROPELLED. |
| AHNC | CONNECTION STYLE | SWIVEL NUT,GASKET SEAL 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 16 1ST END |
| CQBD | BURST TEST PRESSURE | 16.000 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER COMPOSITION |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| FEAT | SPECIAL FEATURES | AL HYDRAULIC FLUID CONTACT SURFACES AND ASSOCIATED RESIDUAL HYD.FLUID SHALL BE IN ACCORDANCE WITH MIL-STD-1246 |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAJD | THREAD CLASS | 2B 1ST END |
| AARX | INSIDE DIAMETER | 0.380 INCHES NOMINAL |
| ADJS | EXTERIOR COLOR | BLUE |
| CQJX | NOMINAL THREAD SIZE | 0.688 INCHES 1ST END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
