| Part Number : MMFB20U10 | Manufacturer : Eaton Aerospace Ltd | ||
| NSN : 2540-00-155-8780 (2540001558780) | |||
| Item Name : Motor Hydraulic | CAGE Code : 62983 | ||
| NIIN : 00-155-8780 (001558780) | |||
| FSC Code : 2540 Vehicular Furniture and Accessories | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 06128 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MMFB20U10, that of which is listed with the description Motor Hydraulic; Manufactured by Eaton Aerospace Ltd and listed alongside the NSN 2540001558780, part number MMFB20U10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MMFB20U10 | Manufacturer : Eaton Aerospace Ltd | ||
| NSN Number : 2540-00-155-8780 (2540001558780) | |||
| Item Name : Motor Hydraulic | CAGE Code : 62983 | ||
| NIIN : 001558780 | |||
| FSC CODE : 2540 Vehicular Furniture and Accessories | |||
Thank you for taking an interest in part number MMFB20U10, that of which is listed with the description Motor Hydraulic; Manufactured by Eaton Aerospace Ltd and listed alongside the NSN 2540001558780, part number MMFB20U10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2540-00-155-8780 Item PartTypeName: MOTOR,HYDRAULIC | 2540 | 001558780 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MMFB20U10 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HANDRIGHT-HAND |
| AAPL | TORQUE LOAD RATING | 70.0 INCH-POUNDS OR 80.0 INCH-POUNDS |
| AAST | KEY LENGTH | 1.250 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FACE |
| ABSF | KEY WIDTH | 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.562 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ABUJ | THREAD SIZE | 0.750-16 AND 1.625-12 |
| ABWV | SHAFT DIAMETER | 1.248 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 1800.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | 2.875 INCHES NOMINAL |
| AJAB | DRIVE SHAFT TYPE | KEYED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF AND UN |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | INTERNALINTERNAL |
| ASMM | CONNECTION QUANTITY | 21 |
| AWLS | CONNECTION TYPE | DRAIN AND INLET AND OUTLET |
| AXFC | CONNECTION DESIGN | THREADEDTHREADED AND THREADED |
| AXFE | KEY HEIGHT | 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AZFG | MOUNTING BOLT HOLE SPACING | 5.750 IN. BY 5.750 IN. |
| MATT | MATERIAL | IRON CAST HOUSING |
| SFTT | SURFACE TREATMENT | ENAMEL HOUSING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
