| Part Number : ART11-34P-501 | Manufacturer : Eaton Aerospace Ltd | ||
| NSN : 5905-00-261-7565 (5905002617565) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 08199 | ||
| NIIN : 00-261-7565 (002617565) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: ART1134P501 | |||
Thank you for taking an interest in part number ART11-34P-501, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Eaton Aerospace Ltd and listed alongside the NSN 5905002617565, part number ART11-34P-501 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ART11-34P-501 | Manufacturer : Eaton Aerospace Ltd | ||
| NSN Number : 5905-00-261-7565 (5905002617565) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 08199 | ||
| NIIN : 002617565 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number ART11-34P-501, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Eaton Aerospace Ltd and listed alongside the NSN 5905002617565, part number ART11-34P-501 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-261-7565 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 002617565 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACR14CK501J | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ABHP | OVERALL LENGTH | 1.364 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.812 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.275 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.115 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.280 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.275 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.312 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.000 OHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 200.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81205-BACR14CK DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
