| Part Number : C82-656ITEM4 | Manufacturer : Eaton Corporation | ||
| NSN : 5360-00-422-5456 (5360004225456) | |||
| Item Name : Spring Helical Torsion | CAGE Code : 15605 | ||
| NIIN : 00-422-5456 (004225456) | |||
| FSC Code : 5360 Coil Flat Leaf and Wire Springs | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 04228 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: C82656ITEM4 | |||
Thank you for taking an interest in part number C82-656ITEM4, that of which is listed with the description Spring Helical Torsion; Manufactured by Eaton Corporation and listed alongside the NSN 5360004225456, part number C82-656ITEM4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2001 humana press inc
CAGE Code: 34CH3 |
5 11 inc
CAGE Code: 3YEL6 |
|
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
3m unitek corporation
CAGE Code: 90444 |
12 volt shop
CAGE Code: Z0JM2 |
|
3 d machining inc
CAGE Code: 09SY7 |
14 dock drive inc
CAGE Code: 14677 |
|
10zig technology inc
CAGE Code: 49E04 |
28eme groupe geographique
CAGE Code: FAR17 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
21st century electronics inc
CAGE Code: 60092 |
|
4 s mfg
CAGE Code: 0D9C0 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
4 cs electronic packaging inc
CAGE Code: 60744 |
| Part Number : C82-656ITEM4 | Manufacturer : Eaton Corporation | ||
| NSN Number : 5360-00-422-5456 (5360004225456) | |||
| Item Name : Spring Helical Torsion | CAGE Code : 15605 | ||
| NIIN : 004225456 | |||
| FSC CODE : 5360 Coil Flat Leaf and Wire Springs | |||
Thank you for taking an interest in part number C82-656ITEM4, that of which is listed with the description Spring Helical Torsion; Manufactured by Eaton Corporation and listed alongside the NSN 5360004225456, part number C82-656ITEM4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5360-00-422-5456 Item PartTypeName: SPRING,HELICAL,TORSION | 5360 | 004225456 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 89128W1ITEM1C | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.332 INCHES NOMINAL |
| ABQK | END STYLE | STRAIGHT END BOTH ENDS |
| AGEK | SPRING FREE LENGTH | 2.250 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 0.330 INCHES NOMINAL |
| APCN | COIL QUANTITY | 18-1/2 |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND |
| AXLP | SPRING DEFLECTION RATE | 3.100 POUNDS PER INCH NOMINAL |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | 0.428 INCHES NOMINAL |
| AXLX | COIL AXIS TO CENTER SECTION DISTANCE | 0.500 INCHES NOMINAL |
| AXLY | CENTER LOOP RADIUS | 0.115 INCHES NOMINAL |
| AXMH | END ANGULAR RELATIONSHIP | END W/LH HELIX OF COIL ANGLED TO CENTER SECTION AND END W/RH HELIX OF COIL ANGLED TO CENTER SECTION |
| CXTH | END LENGTH | 1.160 INCHES NOMINAL BOTH ENDS |
| CXTM | END LENGTH FROM COIL AXIS TO FIRST BEND | 0.214 INCHES NOMINAL BOTH ENDS |
| CXTN | END LENGTH FROM FIRST BEND TO SECOND BEND OR END | 0.946 INCHES NOMINAL BOTH ENDS |
| CXTS | END TANGENT ANGLE | 45.0 DEGREES NOMINAL |
| CXWF | CENTER STYLE | U TYPE |
| MATT | MATERIAL | STEEL COMP 302 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE TORSION RIGHT HAND |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
