Part Number : 301718 | Manufacturer : Eaton Corporation | ||
NSN : 5360-01-146-3377 (5360011463377) | |||
Item Name : Spring Flat | CAGE Code : 99185 | ||
NIIN : 01-146-3377 (011463377) | |||
FSC Code : 5360 Coil Flat Leaf and Wire Springs | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 61782 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 301718, that of which is listed with the description Spring Flat; Manufactured by Eaton Corporation and listed alongside the NSN 5360011463377, part number 301718 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 301718 | Manufacturer : Eaton Corporation | ||
NSN Number : 5360-01-146-3377 (5360011463377) | |||
Item Name : Spring Flat | CAGE Code : 99185 | ||
NIIN : 011463377 | |||
FSC CODE : 5360 Coil Flat Leaf and Wire Springs |
Thank you for taking an interest in part number 301718, that of which is listed with the description Spring Flat; Manufactured by Eaton Corporation and listed alongside the NSN 5360011463377, part number 301718 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5360-01-146-3377 Item PartTypeName: SPRING,FLAT | 5360 | 011463377 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
301718 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
FEAT | SPECIAL FEATURES | MATL STEEL SAE 1095 ROLLED EDGE; 0.125 IN THICK X 1.437 IN WIDE X 10.000 IN LONG; HARDENED TO ROCKWELL C 45-47; 0.500 IN RADIUS BEND 0.500 IN FROM EACH END; SPRING IS CURVED TO A 0.937 IN FREE HEIGHT; SPRING SURFACE IS SHOT PEENED; NO. 10 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote