| Part Number : 40763-6 | Manufacturer : Economy Engineering Co | ||
| NSN : 3110-01-127-8082 (3110011278082) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 72074 | ||
| NIIN : 01-127-8082 (011278082) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 407636 | |||
Thank you for taking an interest in part number 40763-6, that of which is listed with the description Bearing Ball Annular; Manufactured by Economy Engineering Co and listed alongside the NSN 3110011278082, part number 40763-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 40763-6 | Manufacturer : Economy Engineering Co | ||
| NSN Number : 3110-01-127-8082 (3110011278082) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 72074 | ||
| NIIN : 011278082 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 40763-6, that of which is listed with the description Bearing Ball Annular; Manufactured by Economy Engineering Co and listed alongside the NSN 3110011278082, part number 40763-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-127-8082 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 011278082 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 40763-6 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 11.00 MILLIMETERS NOMINAL |
| ABXV | BORE DIAMETER | 0.5000 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 35.00 MILLIMETERS NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0020 INCHES MINIMUM RADIAL AND 0.0080 INCHES MAXIMUM RADIAL |
| CBBL | FEATURES PROVIDED | SNAP RING-GROOVE MOUNTING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | LOW SPEED TEST; 75 PERCENT FULL OF SPECIFIED LUBRICANT; FURNISHED WITH 9 BALLS,0.2100 IN. DIA; RADIAL CLEARANCE MUST BE TESTED UNDER A 3 LB PLUS OR MINIS 4 OUNCE GAUGE LOAD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | ALVANIA 3,FSCM 54527 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
