| Part Number : 375-05-05 PART 40-45-26 | Manufacturer : Ederer Inc | ||
| NSN : 5315-01-295-8806 (5315012958806) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 63952 | ||
| NIIN : 01-295-8806 (012958806) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16749 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3750505PART404526 | |||
Thank you for taking an interest in part number 375-05-05 PART 40-45-26, that of which is listed with the description Pin Shoulder Headless; Manufactured by Ederer Inc and listed alongside the NSN 5315012958806, part number 375-05-05 PART 40-45-26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 375-05-05 PART 40-45-26 | Manufacturer : Ederer Inc | ||
| NSN Number : 5315-01-295-8806 (5315012958806) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 63952 | ||
| NIIN : 012958806 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 375-05-05 PART 40-45-26, that of which is listed with the description Pin Shoulder Headless; Manufactured by Ederer Inc and listed alongside the NSN 5315012958806, part number 375-05-05 PART 40-45-26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-295-8806 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 012958806 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 375-40-45-26 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | CHAMFERED AND COUNTERBORED |
| AASA | THREAD LENGTH | 0.750 INCHES NOMINAL |
| AATR | SHANK LENGTH | 0.750 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 2.3745 INCHES MINIMUM AND 2.3750 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 2.352 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 6.562 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.344 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.375 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | THREADED END |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER |
| CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DRILL 0.344 IN. NOMINAL DIAMETER 3.562 INCH NOMINAL DEPTH LONGITUDINAL HOLE IN SHOULDER END,ON AXIAL CENTER INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE,TAP WITH 0.125 NATIONAL PIPE THREAD; TWO SYMMETRICAL GROOVES PARALLEL TO |
| STYL | STYLE DESIGNATOR | UNDERCUT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
