| Part Number : 122634-4 | Manufacturer : Edo Corporation | ||
| NSN : 5340-01-520-9085 (5340015209085) | |||
| Item Name : Bracket Double Angle | CAGE Code : 82340 | ||
| NIIN : 01-520-9085 (015209085) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20354 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1226344 | |||
Thank you for taking an interest in part number 122634-4, that of which is listed with the description Bracket Double Angle; Manufactured by Edo Corporation and listed alongside the NSN 5340015209085, part number 122634-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 122634-4 | Manufacturer : Edo Corporation | ||
| NSN Number : 5340-01-520-9085 (5340015209085) | |||
| Item Name : Bracket Double Angle | CAGE Code : 82340 | ||
| NIIN : 015209085 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 122634-4, that of which is listed with the description Bracket Double Angle; Manufactured by Edo Corporation and listed alongside the NSN 5340015209085, part number 122634-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-520-9085 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 015209085 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 122634-4 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | Mounting Hole Type | PLAIN |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| ADLL | Second Leg Length | 1.940 INCHES NOMINAL |
| CSSR | Second Leg Angle | 110.0 DEGREES NOMINAL |
| SFTT | Surface Treatment | ANODIZE AND PRIMER EPOXY AND PLASTIC EPOXY |
| CSSQ | First Leg Angle | 175.0 DEGREES NOMINAL |
| MDCL | Material Document And Classification | QQ-A-250/11 MIL SPEC SINGLE MATERIAL RESPONSE |
| STDC | Surface Treatment Document And Classification | DAMIL-A-8625TY2CL1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-22750 MIL SPEC 3RD TREATMENT RESPONSE |
| AHLF | Second Leg Width | 0.620 INCHES NOMINAL |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.310 INCHES NOMINAL |
| AHLX | Second Leg Distance Between First And Second Hole Centers Along Length | 2.240 INCHES NOMINAL |
| AJZU | First Leg Style | SQUARE |
| AGAV | End Item Identification | OPERTING GEAR |
| AKCU | Second Leg Hole Arrangement Style | THREE HOLES |
| AHLK | First Leg Hole Diameter | 0.250 INCHES NOMINAL |
| AHLN | Second Leg Hole Diameter | 0.250 INCHES NOMINAL |
| AHLY | Second Leg Distance Between Second And Third Hole Centers Along Length | 2.240 INCHES NOMINAL |
| AKAU | First Leg Hole Arrangement Style | ONE HOLE |
| AKBU | Second Leg Style | SQUARE |
| STYL | Style Designator | ADJACENT ANGLES |
| AHPX | Second Leg Thickness | 0.125 INCHES NOMINAL |
| AHQA | Center Section Width | 0.620 INCHES NOMINAL |
| ADLK | First Leg Length | 5.720 INCHES NOMINAL |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.310 INCHES NOMINAL |
| MATT | Material | ALUMINUM ALLOY 6061 |
| FEAT | Special Features | BAREA BETWEEN LEGS HAS TWO MOUNTING HOLES SPACED 2.000 INCHES APART BEGINNING AT A POSITION 1.290 INCHES FROM 110 DEGREE ANGLE (OFF OF FIRST LEG); FOR USE ON GENERATOR EXHAUST LOUVER INSTALLATION |
| AHPW | First Leg Thickness | 0.125 INCHES NOMINAL |
| AHQB | Center Section Thickness | 0.125 INCHES NOMINAL |
| AHQN | First Leg Width | 0.620 INCHES NOMINAL |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.400 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| AHPZ | Center Section Height | 3.850 INCHES NOMINAL |
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.690 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
