Part Number : H-100 | Manufacturer : Egs Electrical Corporation | ||
NSN : 5340-01-067-8863 (5340010678863) | |||
Item Name : Clip Spring Tension | CAGE Code : 03743 | ||
NIIN : 01-067-8863 (010678863) | |||
FSC Code : 5340 Hardware Commercial | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 20815 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: H100 |
Thank you for taking an interest in part number H-100, that of which is listed with the description Clip Spring Tension; Manufactured by Egs Electrical Corporation and listed alongside the NSN 5340010678863, part number H-100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : H-100 | Manufacturer : Egs Electrical Corporation | ||
NSN Number : 5340-01-067-8863 (5340010678863) | |||
Item Name : Clip Spring Tension | CAGE Code : 03743 | ||
NIIN : 010678863 | |||
FSC CODE : 5340 Hardware Commercial |
Thank you for taking an interest in part number H-100, that of which is listed with the description Clip Spring Tension; Manufactured by Egs Electrical Corporation and listed alongside the NSN 5340010678863, part number H-100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-067-8863 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 010678863 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
H-100 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.281 INCHES NOMINAL |
ABGL | WIDTH | 0.875 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 2.406 INCHES NOMINAL |
AXGY | MOUNTING METHOD | UNTHREADED HOLE |
AZWE | DISTANCE FROM LOOP CENTER TO END | 1.156 INCHES NOMINAL |
CJYS | LOOP/HOLDING DIMENSION | 1.062 INCHES MINIMUM AND 1.344 INCHES MAXIMUM |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | ZINC OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote