| Part Number : 360014 | Manufacturer : Elder And Co | ||
| NSN : 4720-00-241-4620 (4720002414620) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 56152 | ||
| NIIN : 00-241-4620 (002414620) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 360014, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Elder And Co and listed alongside the NSN 4720002414620, part number 360014 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 360014 | Manufacturer : Elder And Co | ||
| NSN Number : 4720-00-241-4620 (4720002414620) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 56152 | ||
| NIIN : 002414620 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 360014, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Elder And Co and listed alongside the NSN 4720002414620, part number 360014 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-241-4620 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 002414620 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 40SW40FCL48FCL37-16 3-8IN | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 2.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 3.125 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| AEPR | FLANGE OUTSIDE DIAMETER | 3.312 INCHES NOMINAL 1ST END |
| AEPR | FLANGE OUTSIDE DIAMETER | 4.000 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER,SYNTHETIC AND 1ST LAYER SPIRALLY LAID RAYON CORD |
| CQGM | MAXIMUM OPERATING PRESSURE | 65.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 37.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 16.375 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FEAT | SPECIAL FEATURES | CLAMPS FURNISHED |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
