Part Number : H692-1802-156 | Manufacturer : Electric Boat Corporation | ||
NSN : 5340-01-498-3136 (5340014983136) | |||
Item Name : Clamp Bridge | CAGE Code : 96169 | ||
NIIN : 01-498-3136 (014983136) | |||
FSC Code : 5340 Hardware Commercial | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 11206 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: H6921802156 |
Thank you for taking an interest in part number H692-1802-156, that of which is listed with the description Clamp Bridge; Manufactured by Electric Boat Corporation and listed alongside the NSN 5340014983136, part number H692-1802-156 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : H692-1802-156 | Manufacturer : Electric Boat Corporation | ||
NSN Number : 5340-01-498-3136 (5340014983136) | |||
Item Name : Clamp Bridge | CAGE Code : 96169 | ||
NIIN : 014983136 | |||
FSC CODE : 5340 Hardware Commercial |
Thank you for taking an interest in part number H692-1802-156, that of which is listed with the description Clamp Bridge; Manufactured by Electric Boat Corporation and listed alongside the NSN 5340014983136, part number H692-1802-156 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-498-3136 Item PartTypeName: CLAMP,BRIDGE | 5340 | 014983136 | 0 | P | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | U | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
H692-1802-156 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
STYL | Style Designator | FLAT |
HGTH | Height | 0.750 INCHES NOMINAL |
ABHP | Overall Length | 1.750 INCHES NOMINAL |
FEAT | Special Features | 0DRAWING CALLS THIS A RETAINER PIN; IT IS ROUND, NOT FLAT AND MADE FROM 1.750 INCH STOCK; HOLE IN CENTER TOP IS DRILLED THRU AND TAPPED 1/4-20UNC-3B; BOTTOM EDGE IS CHAMFERED ON OUTSIDE 1/16 X 45 DEGREES AND THREADED INTERNALLY 1.500-6UNC-3B |
AAZQ | Hole Depth | 0.1875 INCHES NOMINAL |
ADJU | Inside Length | 1.531 INCHES NOMINAL |
AAUB | Hole Diameter | 0.250 INCHES NOMINAL |
ABMK | Overall Width | 1.750 INCHES NOMINAL |
AGAV | End Item Identification | LOS ANGELES SSN(688); MISC ELECTRON |
MRC | Decoded Requirement | Clear Text Reply |
MATT | Material | NICKEL ALLOY OVERALL |
MDCL | Material Document And Classification | QQ-N-281, CLASS A, FORM 1, HOT FINISHED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote