| Part Number : 442-006-058 | Manufacturer : Elettronica Gmbh | ||
| NSN : 5905-00-517-9764 (5905005179764) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : C3141 | ||
| NIIN : 00-517-9764 (005179764) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 442006058 | |||
Thank you for taking an interest in part number 442-006-058, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Elettronica Gmbh and listed alongside the NSN 5905005179764, part number 442-006-058 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 d machining inc
CAGE Code: 09SY7 |
3d robotics llc
CAGE Code: 64TY6 |
|
3m health care ltd
CAGE Code: U5989 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
4 s mfg
CAGE Code: 0D9C0 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
3m co engineering document systems
CAGE Code: 1BY21 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
5 11 tactical inc
CAGE Code: 3P4J9 |
3 vets inc
CAGE Code: 1MK20 |
|
2kr systems llc
CAGE Code: 730Z2 |
1 source electronics inc
CAGE Code: 551K1 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
| Part Number : 442-006-058 | Manufacturer : Elettronica Gmbh | ||
| NSN Number : 5905-00-517-9764 (5905005179764) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : C3141 | ||
| NIIN : 005179764 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 442-006-058, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Elettronica Gmbh and listed alongside the NSN 5905005179764, part number 442-006-058 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-517-9764 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 005179764 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3262X1-202 | B | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 4320.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/5 GOVERNMENT SPECIFICATION |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.050 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.145 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 9000.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.010 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
