| Part Number : HJ4-1-4 | Manufacturer : Ellis And Watts International Llc | ||
| NSN : 3020-01-021-2085 (3020010212085) | |||
| Item Name : Pulley Groove | CAGE Code : 98437 | ||
| NIIN : 01-021-2085 (010212085) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 08109 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HJ414 | |||
Thank you for taking an interest in part number HJ4-1-4, that of which is listed with the description Pulley Groove; Manufactured by Ellis And Watts International Llc and listed alongside the NSN 3020010212085, part number HJ4-1-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 d mfg inc
CAGE Code: 66484 |
21st century paramount inc
CAGE Code: 55428 |
|
3nity products llc
CAGE Code: 8HDM8 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
3m purification inc
CAGE Code: 15472 |
3 phoenix inc
CAGE Code: 3NJE3 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
3h industries inc
CAGE Code: 60754 |
|
3m france
CAGE Code: F0347 |
3 m federal systems dept
CAGE Code: 68352 |
|
400hz repair
CAGE Code: 03MS6 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
20th century fiberglass
CAGE Code: 80241 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
| Part Number : HJ4-1-4 | Manufacturer : Ellis And Watts International Llc | ||
| NSN Number : 3020-01-021-2085 (3020010212085) | |||
| Item Name : Pulley Groove | CAGE Code : 98437 | ||
| NIIN : 010212085 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number HJ4-1-4, that of which is listed with the description Pulley Groove; Manufactured by Ellis And Watts International Llc and listed alongside the NSN 3020010212085, part number HJ4-1-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-021-2085 Item PartTypeName: PULLEY,GROOVE | 3020 | 010212085 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| IVP44 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGA | GROOVE DEPTH | 0.490 INCHES NOMINAL |
| ABGF | GROOVE WIDTH | 0.500 INCHES MINIMUM AND 0.751 INCHES MAXIMUM |
| ABHE | OUTSIDE DIAMETER | 4.150 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.875 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.188 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.625 INCHES NOMINAL |
| ADGE | BORE LENGTH | 1.875 INCHES NOMINAL |
| AEVF | DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | 0.391 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | LOGISTGICS SUPPORT VESSEL |
| AGGS | V GROOVE ANGLE IN DEG | 17.5 |
| ANNQ | MATERIAL AND LOCATION | STEEL OVERALL |
| AQPL | FACE WIDTH | 0.344 INCHES NOMINAL |
| ARJD | DESIGN FORM | PLAIN |
| ASBP | BORE TYPE | STRAIGHT |
| AWJQ | BEARINGS | NOT INCLUDED |
| AXHQ | GROOVE QUANTITY | 1 |
| AXND | COUNTERBORE FEATURE | NOT INCLUDED |
| BSGG | KEYING FACILITY | INCLUDED |
| BSGK | KEYING FACILITY TYPE | KEYWAY |
| BSYG | SPLIT HUB FEATURE | NOT INCLUDED |
| BXSJ | LIGHTENING HOLE | NOT INCLUDED |
| BXSK | INTEGRAL COOLING VANE | NOT INCLUDED |
| BXSM | GROOVE SHAPE | V |
| BYDS | BORE FEATURE | INCLUDED |
| BYDZ | PROTRUDING HUB CHARACTERISTIC | PLAIN |
| BYZD | HUB END OUTSIDE DIAMETER AND LOCATION | 1.250 INCHES NOMINAL AA END AND 1.562 INCHES NOMINAL BB END |
| BYZF | DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION | 1.219 INCHES NOMINAL AA END AND 0.312 INCHES NOMINAL BB END |
| FEAT | SPECIAL FEATURES | ADJUSTABLE PULLEY |
| NMBR | QUANTITY | 1 |
| STYL | STYLE DESIGNATOR | PLAIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
