| Part Number : RPB-200-C2 | Manufacturer : Emerson Power Transmission | ||
| NSN : 3130-01-230-3658 (3130012303658) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 76474 | ||
| NIIN : 01-230-3658 (012303658) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: RPB200C2 | |||
Thank you for taking an interest in part number RPB-200-C2, that of which is listed with the description Bearing Unit Roller; Manufactured by Emerson Power Transmission and listed alongside the NSN 3130012303658, part number RPB-200-C2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RPB-200-C2 | Manufacturer : Emerson Power Transmission | ||
| NSN Number : 3130-01-230-3658 (3130012303658) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 76474 | ||
| NIIN : 012303658 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number RPB-200-C2, that of which is listed with the description Bearing Unit Roller; Manufactured by Emerson Power Transmission and listed alongside the NSN 3130012303658, part number RPB-200-C2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-230-3658 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 012303658 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RPB-200-C2 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.750 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 1.500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.0000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.250 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.310 INCHES MINIMUM AND 7.190 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 4.620 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.440 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 8.880 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 2.440 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.250 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BEARING |
| MATT | MATERIAL | STEEL COLLAR |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,OPTIONAL SPLIT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
