| Part Number : 110-2076 | Manufacturer : Enco Mfg Co | ||
| NSN : 3416-01-390-4591 (3416013904591) | |||
| Item Name : Lathe Engine | CAGE Code : 0GV04 | ||
| NIIN : 01-390-4591 (013904591) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1102076 | |||
Thank you for taking an interest in part number 110-2076, that of which is listed with the description Lathe Engine; Manufactured by Enco Mfg Co and listed alongside the NSN 3416013904591, part number 110-2076 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 110-2076 | Manufacturer : Enco Mfg Co | ||
| NSN Number : 3416-01-390-4591 (3416013904591) | |||
| Item Name : Lathe Engine | CAGE Code : 0GV04 | ||
| NIIN : 013904591 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 110-2076, that of which is listed with the description Lathe Engine; Manufactured by Enco Mfg Co and listed alongside the NSN 3416013904591, part number 110-2076 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 60.0 TO 1550.0 |
| BTTD | RATED SWING | 12.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 12.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 7.500 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 40 |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| BTYN | HOLLOW SPINDLE HOLE SIZE | 1.500 INCHES NOMINAL |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | SINGLE |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CABINET STAND; 1 6 IN. 3-JAW CHUCK; 1 8 IN. 4-CHUCK; 1 4-POSITION TOOLPOST; 2 CENTERS; 1 CHIP PAN; 1 SET OF CHANGE GEARS; 1 FACEPLATE; 1 STEADY REST; 1 FOLLOWREST; 1 TOOL KIT |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AWHA | BED TYPE | PERMANENT GAP |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FEAT | SPECIAL FEATURES | ELECTRO-MAGNETIC STARTER SWITCH; D1-4 SPINDLE WITH 1 9/16 IN. BORE; REINFORCED CROSS RIBS; HARDENED AND GROUND BED; HEADSTOCK WITH TAPERED ROLLER BEARINGS; SWING IN GAP 17 IN.; CROSS SLIDE TRAVEL 5 1/2 IN.; COMPOUND REST TRAVEL 3 1/4 IN.; TAILSTOCK SPINDLE TRAVEL 3 3/4 IN.; TAILSTOCK TAPER 3 MORSE TAPER; 29 METRIC THREAD CHANGES 0.2MILLIMETERS TO 4.5 MILLIMETERS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAXX | MOUNTING TYPE | BENCH |
| APGF | DESIGN TYPE | SCREW |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.500 INCHES NOMINAL |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 112.0 PER INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
