| Part Number : 954078-1 | Manufacturer : Encore Interiors Inc | ||
| NSN : 5315-01-471-8095 (5315014718095) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 1P175 | ||
| NIIN : 01-471-8095 (014718095) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16749 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 9540781 | |||
Thank you for taking an interest in part number 954078-1, that of which is listed with the description Pin Shoulder Headless; Manufactured by Encore Interiors Inc and listed alongside the NSN 5315014718095, part number 954078-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 954078-1 | Manufacturer : Encore Interiors Inc | ||
| NSN Number : 5315-01-471-8095 (5315014718095) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 1P175 | ||
| NIIN : 014718095 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 954078-1, that of which is listed with the description Pin Shoulder Headless; Manufactured by Encore Interiors Inc and listed alongside the NSN 5315014718095, part number 954078-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-471-8095 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 014718095 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 954078-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| CQTR | SECOND SHANK DIAMETER | 0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| STYL | STYLE DESIGNATOR | UNDERCUT |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AMFM | SECOND END TAPER LENGTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAZE | SHANK DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| CTHC | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| AATR | SHANK LENGTH | 0.429 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.116 INCHES NOMINAL |
| CRDY | FIRST END LOCATION | THREADED END |
| ABPA | UNDERCUT DIAMETER | 0.415 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.001 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, COMP 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AGAV | III END ITEM IDENTIFICATION | C-17A |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, ALIGNMENT |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| AAJD | THREAD CLASS | 2A |
| FEAT | SPECIAL FEATURES | SHOULDER OF THE ITEM IS LOCATED 0.10 INCH BELOW THE GROOVE. |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| CWAS | SECOND SHANK LENGTH | 1.500 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.435 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
