| Part Number : NAS1121-25H | Manufacturer : F And C Sales Inc | ||
| NSN : 5305-01-026-0831 (5305010260831) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 30902 | ||
| NIIN : 01-026-0831 (010260831) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: NAS112125H | |||
Thank you for taking an interest in part number NAS1121-25H, that of which is listed with the description Screw Close Tolerance; Manufactured by F And C Sales Inc and listed alongside the NSN 5305010260831, part number NAS1121-25H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1121-25H | Manufacturer : F And C Sales Inc | ||
| NSN Number : 5305-01-026-0831 (5305010260831) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 30902 | ||
| NIIN : 010260831 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1121-25H, that of which is listed with the description Screw Close Tolerance; Manufactured by F And C Sales Inc and listed alongside the NSN 5305010260831, part number NAS1121-25H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-026-0831 Item Description: Screw Close Tolerance | 5305 | 010260831 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Nas1121-25h | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1121 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| ASXK | HOLE QUANTITY | 2 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| AASL | HEAD DIAMETER | 0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| ANEE | GRIP LENGTH | 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AAUB | HOLE DIAMETER | 0.038 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AASU | HEAD HEIGHT | 0.074 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.823 INCHES MINIMUM AND 1.853 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
