| Part Number : 8S6G | Manufacturer : Fairbanks Morse Llc | ||
| NSN : 5305-00-013-3482 (5305000133482) | |||
| Item Name : Screw Machine | CAGE Code : 7PZX0 | ||
| NIIN : 00-013-3482 (000133482) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 8S6G, that of which is listed with the description Screw Machine; Manufactured by Fairbanks Morse Llc and listed alongside the NSN 5305000133482, part number 8S6G is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m touch systems inc
CAGE Code: 0A1V7 |
1st american metals inc
CAGE Code: 0MP49 |
|
3m belgium nv
CAGE Code: B2281 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
3m aerospace
CAGE Code: R0844 |
3m telecom system group
CAGE Code: 0Y7Y1 |
|
31 mile equipment co
CAGE Code: 07PE3 |
2connect it b v
CAGE Code: HG221 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
360 tents l l c
CAGE Code: 4CT45 |
|
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
3 com/us robotics
CAGE Code: 1B8Q7 |
|
3m espana sa
CAGE Code: 0211B,H7034 |
3m france
CAGE Code: F0347 |
|
3com sas
CAGE Code: F9930 |
| Part Number : 8S6G | Manufacturer : Fairbanks Morse Llc | ||
| NSN Number : 5305-00-013-3482 (5305000133482) | |||
| Item Name : Screw Machine | CAGE Code : 7PZX0 | ||
| NIIN : 000133482 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 8S6G, that of which is listed with the description Screw Machine; Manufactured by Fairbanks Morse Llc and listed alongside the NSN 5305000133482, part number 8S6G is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-013-3482 Item PartTypeName: SCREW,MACHINE | 5305 | 000133482 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FFS92 | 1 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.275 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2S STYLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
