| Part Number : HT4053-4-3A | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN : 5305-01-197-8273 (5305011978273) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 01-197-8273 (011978273) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT405343A | |||
Thank you for taking an interest in part number HT4053-4-3A, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305011978273, part number HT4053-4-3A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4053-4-3A | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN Number : 5305-01-197-8273 (5305011978273) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 011978273 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4053-4-3A, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305011978273, part number HT4053-4-3A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-197-8273 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011978273 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M740-4L3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.516 INCHES MINIMUM FIRST HOLE AND 0.556 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
