| Part Number : 3M1170D3-7A | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN : 5305-01-480-0492 (5305014800492) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 01-480-0492 (014800492) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M1170D37A | |||
Thank you for taking an interest in part number 3M1170D3-7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305014800492, part number 3M1170D3-7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M1170D3-7A | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN Number : 5305-01-480-0492 (5305014800492) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 014800492 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M1170D3-7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305014800492, part number 3M1170D3-7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-480-0492 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014800492 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10330436 | 5 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.189 INCHES NOMINAL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAVA | POINT DIAMETER | 0.345 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASB | FASTENER LENGTH | 0.783 INCHES NOMINAL |
| AGAV | III END ITEM IDENTIFICATION | DOOR,ACCESS,AIRCRAFT (F/A-18F) |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CQBC | MINIMUM TENSILE STRENGTH | 2200 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| ABQJ | POINT STYLE | FLAT |
| ANEE | GRIP LENGTH | 0.438 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
