| Part Number : 3M1170D4D7A | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN : 5305-01-495-9270 (5305014959270) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 01-495-9270 (014959270) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 3M1170D4D7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305014959270, part number 3M1170D4D7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M1170D4D7A | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN Number : 5305-01-495-9270 (5305014959270) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 014959270 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M1170D4D7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305014959270, part number 3M1170D4D7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-495-9270 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014959270 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1027D4D7A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AAUB | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| AASB | FASTENER LENGTH | 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGRE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO(125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR),6AL-4V TITANIUM (95 KSI SHEAR) |
| ANEE | GRIP LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| AAJD | THREAD CLASS | 3A |
| BQDM | HOLE TYPE | DRILLED |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
