| Part Number : 9M671-C1L | Manufacturer : Fastener Specialty Inc | ||
| NSN : 5340-01-305-2639 (5340013052639) | |||
| Item Name : Bracket Double Angle | CAGE Code : 04967 | ||
| NIIN : 01-305-2639 (013052639) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20354 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 9M671C1L | |||
Thank you for taking an interest in part number 9M671-C1L, that of which is listed with the description Bracket Double Angle; Manufactured by Fastener Specialty Inc and listed alongside the NSN 5340013052639, part number 9M671-C1L is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9M671-C1L | Manufacturer : Fastener Specialty Inc | ||
| NSN Number : 5340-01-305-2639 (5340013052639) | |||
| Item Name : Bracket Double Angle | CAGE Code : 04967 | ||
| NIIN : 013052639 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 9M671-C1L, that of which is listed with the description Bracket Double Angle; Manufactured by Fastener Specialty Inc and listed alongside the NSN 5340013052639, part number 9M671-C1L is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-305-2639 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 013052639 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10113123 | 6 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| AHLN | SECOND LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHQA | CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| AHQP | FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHQB | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 0.570 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| CBBL | FEATURES PROVIDED | NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 1230 AND ALUMINUM ALLOY 2024 |
| SFTT | SURFACE TREATMENT | PLASTIC POLYAMIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ADJACENT ANGLES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
