| Part Number : FTN-3-0-3 | Manufacturer : Fatigue Technology Inc | ||
| NSN : 4920-01-562-0800 (4920015620800) | |||
| Item Name : Puller Nose Cap | CAGE Code : 51439 | ||
| NIIN : 01-562-0800 (015620800) | |||
| FSC Code : 4920 Aircraft Maintenance And Repair Shop Specialized Equipment | |||
| FSG Code : 49 Maintenance And Repair Shop Equipment | |||
| INC Code : 77777 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: FTN303 | |||
Thank you for taking an interest in part number FTN-3-0-3, that of which is listed with the description Puller Nose Cap; Manufactured by Fatigue Technology Inc and listed alongside the NSN 4920015620800, part number FTN-3-0-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : FTN-3-0-3 | Manufacturer : Fatigue Technology Inc | ||
| NSN Number : 4920-01-562-0800 (4920015620800) | |||
| Item Name : Puller Nose Cap | CAGE Code : 51439 | ||
| NIIN : 015620800 | |||
| FSC CODE : 4920 Aircraft Maintenance And Repair Shop Specialized Equipment | |||
Thank you for taking an interest in part number FTN-3-0-3, that of which is listed with the description Puller Nose Cap; Manufactured by Fatigue Technology Inc and listed alongside the NSN 4920015620800, part number FTN-3-0-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | FASTENER SIZE: 3/16 INCH; RETAINER CLASS: NOMINAL; CLASS OF FIT: CLASS III |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | THE FORCE TEC NOSECAP, WHICH IS THREADED ONTO THE BARREL OF THE PULLER UNIT, IS DESIGNED TO ALLOW THE RETAINER FLANGE TO BE PULLED FLUSH DURING INSTALLATION. THE NOSECAP ALSO HOLDS THE SLEEVE IN PLACE DURING PROCESSING AND REACTS THE PULLING FORCE BACK INTO THE PARENT MATERIAL. JAW SETS ARE DESIGNED TO LAST FOR MANY INSTALLATIONS, HOWEVER; IF THEY BECOME WORN, THE SLEEVE MAYSLIP INSIDE THE INNER JAW DURING INSTALLATION. BOTH THE WORN JAWS SHOULD THEN BE REPLACED. |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NOSECAP ASSEMBLY AND JAW SET |
| MRC | Decoded Requirement | Clear Text Reply |
| CXCY | Part Name Assigned By Controlling Agency | NOSECAP ASSEMBLY AND JAW SET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
