Part Number : WAS122 | Manufacturer : Federal Corporation | ||
NSN : 5310-00-595-5515 (5310005955515) | |||
Item Name : Washer Spring Tension | CAGE Code : 21900 | ||
NIIN : 00-595-5515 (005955515) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15938 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number WAS122, that of which is listed with the description Washer Spring Tension; Manufactured by Federal Corporation and listed alongside the NSN 5310005955515, part number WAS122 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : WAS122 | Manufacturer : Federal Corporation | ||
NSN Number : 5310-00-595-5515 (5310005955515) | |||
Item Name : Washer Spring Tension | CAGE Code : 21900 | ||
NIIN : 005955515 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number WAS122, that of which is listed with the description Washer Spring Tension; Manufactured by Federal Corporation and listed alongside the NSN 5310005955515, part number WAS122 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-595-5515 Item PartTypeName: WASHER,SPRING TENSION | 5310 | 005955515 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
WAS122 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
ABKV | OUTSIDE DIAMETER | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
ABKW | OVERALL HEIGHT | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
MATT | MATERIAL | STEEL COMP 1095 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | ZINC OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote