| Part Number : P000591 | Manufacturer : Federal Equipment Company | ||
| NSN : 3130-01-049-6300 (3130010496300) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 60587 | ||
| NIIN : 01-049-6300 (010496300) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number P000591, that of which is listed with the description Bearing Unit Roller; Manufactured by Federal Equipment Company and listed alongside the NSN 3130010496300, part number P000591 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : P000591 | Manufacturer : Federal Equipment Company | ||
| NSN Number : 3130-01-049-6300 (3130010496300) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 60587 | ||
| NIIN : 010496300 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number P000591, that of which is listed with the description Bearing Unit Roller; Manufactured by Federal Equipment Company and listed alongside the NSN 3130010496300, part number P000591 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-049-6300 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 010496300 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| DT6-16-190-718 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
| ABTD | MOUNTING SLOT WIDTH | 0.6250 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.9375 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.2500 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.6250 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.7500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 5.0000 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 8.8750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 2.5625 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.3437 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.5000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
