| Part Number : BACB30LJ3-4 | Manufacturer : Federal Mfg Co Inc | ||
| NSN : 5306-00-235-2852 (5306002352852) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 17943 | ||
| NIIN : 00-235-2852 (002352852) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: BACB30LJ34 | |||
Thank you for taking an interest in part number BACB30LJ3-4, that of which is listed with the description Bolt Close Tolerance; Manufactured by Federal Mfg Co Inc and listed alongside the NSN 5306002352852, part number BACB30LJ3-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1 source electronic components inc
CAGE Code: 3FY68 |
4 sure com inc
CAGE Code: 1LDH8 |
|
3d energy pty ltd
CAGE Code: Z0UA3 |
485 engineering installation group
CAGE Code: 13676,14943 |
|
3m belgium nv
CAGE Code: B2281 |
2001 micro systemation ab
CAGE Code: SK396 |
|
3m singapore pte ltd
CAGE Code: QA095 |
3 ring inc
CAGE Code: 68310 |
|
3m espana sa
CAGE Code: 0211B,H7034 |
2101 llc
CAGE Code: 1GH76 |
|
3m norge a s
CAGE Code: N0447 |
3gen corporation
CAGE Code: 3SPS3 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
3w interface corp
CAGE Code: 4V367 |
|
1st team installations llc
CAGE Code: 3FSE9 |
| Part Number : BACB30LJ3-4 | Manufacturer : Federal Mfg Co Inc | ||
| NSN Number : 5306-00-235-2852 (5306002352852) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 17943 | ||
| NIIN : 002352852 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number BACB30LJ3-4, that of which is listed with the description Bolt Close Tolerance; Manufactured by Federal Mfg Co Inc and listed alongside the NSN 5306002352852, part number BACB30LJ3-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-235-2852 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 002352852 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30NF3-4 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| AASK | HEAD STYLE | UNDERCUT HEXAGON |
| AASU | HEAD HEIGHT | 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES TOP OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
