| Part Number : 8521A | Manufacturer : Federal Mogul Corporation | ||
| NSN : 3110-00-953-4495 (3110009534495) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 01212 | ||
| NIIN : 00-953-4495 (009534495) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 8521A, that of which is listed with the description Bearing Ball Annular; Manufactured by Federal Mogul Corporation and listed alongside the NSN 3110009534495, part number 8521A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8521A | Manufacturer : Federal Mogul Corporation | ||
| NSN Number : 3110-00-953-4495 (3110009534495) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 01212 | ||
| NIIN : 009534495 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 8521A, that of which is listed with the description Bearing Ball Annular; Manufactured by Federal Mogul Corporation and listed alongside the NSN 3110009534495, part number 8521A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-953-4495 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 009534495 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ALVANIA 3 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 35.00 MILLIMETERS NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.9990 INCHES MINIMUM AND 4.0000 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGVT | OUTER RING WIDTH | 1.1150 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 21.00 MILLIMETERS NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | INNER RING ROUNDED ON BOTH SIDES 0.060 IN. RADIUS; OUTER RING CHAMFERED 0N INSIDE 0.031 IN. WIDE BY 60 DEG; OUTER RING ROUNDED ON OUTSIDE 0.060 IN. RADIUS ON SIDE WITH PART NO. MARKING,0.375 IN. RADIUS ON NONMARKED SIDE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | ALVANIA 3,FSCM 54527 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL RETAINER |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RING,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
