| Part Number : 09A180-05 | Manufacturer : Federal Mogul Corporation | ||
| NSN : 5340-01-356-1590 (5340013561590) | |||
| Item Name : Bracket Angle | CAGE Code : 1W025 | ||
| NIIN : 01-356-1590 (013561590) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 09A18005 | |||
Thank you for taking an interest in part number 09A180-05, that of which is listed with the description Bracket Angle; Manufactured by Federal Mogul Corporation and listed alongside the NSN 5340013561590, part number 09A180-05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 09A180-05 | Manufacturer : Federal Mogul Corporation | ||
| NSN Number : 5340-01-356-1590 (5340013561590) | |||
| Item Name : Bracket Angle | CAGE Code : 1W025 | ||
| NIIN : 013561590 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 09A180-05, that of which is listed with the description Bracket Angle; Manufactured by Federal Mogul Corporation and listed alongside the NSN 5340013561590, part number 09A180-05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-356-1590 Item PartTypeName: BRACKET,ANGLE | 5340 | 013561590 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 09A180-05 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.550 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.870 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL |
| AJFP | FIRST LEG END RADIUS | 0.375 INCHES NOMINAL |
| AJFQ | SECOND LEG END RADIUS | 0.375 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY2,CL1 MIL SPEC 1ST TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
| AHLK | FIRST LEG HOLE DIAMETER | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | COLOR GRAY |
| SFTT | SURFACE TREATMENT | ANODIZE AND PRIMER EPOXY AND ENAMEL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES NOMINAL |
| SUPP | SUPPLEMENTARY FEATURES (NON-CORE) | SERVES AS ANCHOR POINT FOR SAFETY WIRING JAM NUTS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
