| Part Number : FFS86 | Manufacturer : Federal Specifications | ||
| NSN : 5305-00-135-5056 (5305001355056) | |||
| Item Name : Screw Cap Socket Head | CAGE Code : 81348 | ||
| NIIN : 00-135-5056 (001355056) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16282 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number FFS86, that of which is listed with the description Screw Cap Socket Head; Manufactured by Federal Specifications and listed alongside the NSN 5305001355056, part number FFS86 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : FFS86 | Manufacturer : Federal Specifications | ||
| NSN Number : 5305-00-135-5056 (5305001355056) | |||
| Item Name : Screw Cap Socket Head | CAGE Code : 81348 | ||
| NIIN : 001355056 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number FFS86, that of which is listed with the description Screw Cap Socket Head; Manufactured by Federal Specifications and listed alongside the NSN 5305001355056, part number FFS86 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-135-5056 Item PartTypeName: SCREW,CAP,SOCKET HEAD | 5305 | 001355056 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS24671-21 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AGAV | END ITEM IDENTIFICATION | A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.125 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 4 TYPE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
