| Part Number : 55SC160 | Manufacturer : Gamble Charles T Industries | ||
| NSN : 5905-01-289-9439 (5905012899439) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 16119 | ||
| NIIN : 01-289-9439 (012899439) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 55SC160, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Gamble Charles T Industries and listed alongside the NSN 5905012899439, part number 55SC160 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 55SC160 | Manufacturer : Gamble Charles T Industries | ||
| NSN Number : 5905-01-289-9439 (5905012899439) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 16119 | ||
| NIIN : 012899439 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 55SC160, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Gamble Charles T Industries and listed alongside the NSN 5905012899439, part number 55SC160 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-289-9439 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 012899439 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 55SC160 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -260.0 TO 260.0 |
| AAPP | ELECTRICAL RESISTANCE | 160.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 340.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 340.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 3.438 INCHES MINIMUM AND 4.562 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 1.062 INCHES MAXIMUM |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.250 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 55.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 40.0 DEG CELSIUS |
| AFWW | TERMINAL WIDTH | 0.172 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NAVY EQUIP |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| BYML | MOUNTING HOLE SIZE | 0.190 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| CBME | CUBIC MEASURE | 2.400 CUBIC INCHES |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| PKWT | UNPACKAGED UNIT WEIGHT | 43.1 GRAMS |
| STYL | STYLE DESIGNATOR | TERMINALS ONE EDGE |
| TEST | TEST DATA DOCUMENT | 53711-5859120 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
